KPS is open for in person shopping. Masks are required.
Have a question or need help?We are open M-F 9a-6p & Saturday 10a-3p CSTVisit our store at 40, rue des Dunes. 35400 , SAINT-MALO France
Welcome to pinkwhistlesociety!
KilnParts.com Part Numbers 1000213 Skutt Part Numbers 0169M16587 Skutt Cast Porcelain Peep Plug. Fits all Skutt kilns ever made.
KilnParts.com Part Numbers 1000217 Skutt Part Numbers 0291 Skutt kiln patch is used for glueing broken bricks back together. It can also be mixed with ground up firebrick or Molochite and used to patch large sections of missing brick.
KilnParts.com Part Numbers 1000215 Skutt Part Numbers 0283 Skutt Kiln wash is shipped dry. Mix with water and apply a thin layer to one side of kiln shelves to help prevent glaze from sticking.
KilnParts.com Part Numbers 1000214 Skutt Part Numbers 0168 The Skutt Prop brick is used for holding the lid of the kiln open during preheating and cooling. Kilns with a LidLifter system installed had a built in lid prop.
KilnParts.com Part Numbers 1000225 Skutt Part Numbers 0752P03673 Skutt Plastic Feet for Kiln stands. Fits all kiln stands.
KilnParts.com Part Numbers 1000216 Skutt Part Numbers 0284 Skutt Kiln wash is shipped dry. Mix with water and apply a thin layer to one side of kiln shelves to help prevent glaze from sticking.
KilnParts.com Part Numbers 1000554 Skutt Part Numbers 2463 Skutt Envirovent2 Fiber Gasket
KilnParts.com Part Numbers 1000556 Skutt Part Numbers 3361 The Skutt Envirovent2 is spring loaded to the floor to keep a consistent seal on the kiln slab as it bows slightly when heated. This adapter fits into any Skutt rolling stands, supported by the crossbars, and allows the spring loaded plenum cup to push against the plate instead of the fl...
KilnParts.com Part Numbers 1000238 Skutt Part Numbers 2500 Skutt Envirovent2 Plenum Cup with Fiber Gasket
KilnParts.com Part Numbers 1000237 Skutt Part Numbers 2783 This Pyrometer comes with a Type K thermocouple, thermocouple mounting block, 5 feet of thermocouple wire, and a pyrometer flange for mounting the thermocouple to the kiln. The Pyrometer comes with a case that can be mounted to the wall. It also has a flip out back so that it can be set ...
KilnParts.com Part Numbers 1000227 Skutt Part Numbers 2449 Skutt Envirovent2 Replacement Motor.pinkwhistlesocietyludes power cord and toggle switch preinstalled.
KilnParts.com Part Numbers 1000218 Skutt Part Numbers 0290 Skutt Sairset is a refractory coating that is used on Lids to prevent dust from falling into the kiln during firing. This is not a glue and should be applied in a thin layer to seal the brick surface.
KilnParts.com Part Numbers 1000240 Skutt Part Numbers 2454 Skutt Envirovent2 Spring
KilnParts.com Part Numbers 1000239 Skutt Part Numbers 2453 Skutt Envirovent2 Stand
KilnParts.com Part Numbers 1000557 Skutt Part Numbers 1094 For the price, this is a great choice for glass temperatures applications. However, even though this pyrometer has a temperature rating of 2375 F printed on the face of the unit, Skutt does not recommend it for these temperatures due to the small gauge thermocouple that comes with the un...
KilnParts.com Part Numbers 1000235 Skutt Part Numbers 2462D22003 Skutt Kiln Instruction Manual
KilnParts.com Part Numbers 1000234 Skutt Part Numbers 0604D11678 Skutt Kiln Instruction Manual
KilnParts.com Part Numbers 1000233 Skutt Part Numbers 0936D22678 Skutt Kiln Instruction Manual
KilnParts.com Part Numbers 1000232 Skutt Part Numbers 2040D11678 Skutt Kiln Instruction Manual
KilnParts.com Part Numbers 1000231 Skutt Part Numbers 2003D11678 Skutt Kiln Instruction Manual
KilnParts.com Part Numbers 1000229 Skutt Part Numbers 1639 Skutt Silicone for sealing Envirovent motor to Envirovent or for sealing kiln bottom slab to vent.
KilnParts.com Part Numbers 1000228 Skutt Part Numbers 2477 Skutt Envirovent2 Duct. 3” diameter flexible aluminum duct.
For Model Skutt Part Numbers KilnParts.com Part Numbers 1627-3 2567 1000219 1231-3 0281 and 0270 1000220 12xx 0281 1000221 10xx & GlazeTech 0170 1000222 8xx 0270 1000223 7xx and 6xx 0470 1000224 Skutt Replacement kiln stands.pinkwhistlesocietyludes plastic feet.
In November 2021 Skutt announced that the cost for this replacement motor has exceeded the cost for a brand new EnviroVent2 system so they made the decision to discontinue it.
pinkwhistlesociety Part Numbers 1000226 Skutt Part Numbers 1631
Skutt Envirovent Replacement Motor.pinkwhistlesocietyludes silicone for sealing the new motor to the existing vent. ...