KPS is open for in person shopping. Masks are required.
Have a question or need help?We are open M-F 9a-6p & Saturday 10a-3p CSTVisit our store at 40, rue des Dunes. 35400 , SAINT-MALO France
Welcome to pinkwhistlesociety!
Giffin Grip and Accessories
The Giffin Grip is an innovative trimming chuck for leather-hard or bisque thrown pottery. Designed for pottery trimming, it functions equally well for waxing the foot and banding with oxides for glazing. A simple, direct solution to an age old problem.
International Guarantee:¨90 day money back guarantee if you're not completely satisfied. 10 y...
Replacement bat pin kit. Fits virtually any wheel. Kit includes: Two 1 3/8” Pins, Two 5/8” Pins, Two – Lock Washers, Two – Wing nuts. Stainless steel.
AMACO Decorating Accessories
This white paste is an excellent mending material for bisque that can be used to bond pieces together or fill up broken cavities. Bisque Fix can be colored to match the bisque using metal oxides or ceramic stains. After applying with a spatula, fire to the temperature of the clay and glaze that you are using -- up to Cone 10 (2381°F, 1305°C).Imp...
Dry kiln wash for all temperature ranges. Mix with water and brush on shelves to repel glaze drips. 5Lbs Dry.
Peter Pugger Accessories
EXTRUSION DIES Peter Pugger is pleased to offer extrusion dies that mount directly to the end of the following Vacuum Deairing Mixing Pugmill models: – VPM-7/7SS – VPM-9/9SS – VPM-20/20SS – VPM-30 – VPM-60 (Mounting Hardwarepinkwhistlesocietyluded)
Skutt Vents & Accessories
Mayco Decorating Accessories
Use to mask areas for achieving crisp edge lines and shapes. 6MM wide (.236”)
This syringe-type applicator allows excellent control when applying engobes or casting slips. Snip off end of applicator to adjust for thickness of lines or for consistency of liquid being extruded.
Silicone Carbide Rub Brick for removing glaze drips and kiln wash from shelves. Small size is 3” wide x 6” long and 1” thick.
Now Available After over two years of research, development and rigid testing, the New Touchscreen controller is now available on new Skutt KilnMaster (KMT) and GlassMaster Kilns (GMT).
You can even retrofit existing units with an easy to install Upgrade Kit.
Skutt Touchscreen Controller
Like Your Smartphone the new KMT controller naviga...
These applicators allow the creation of fine or medium lines, dots and letters with Amaco underglazes.
Create an unlimited array of designs utilizing line and dot patterns on ceramic pieces with AMACO underglazes and these applicators. Two needle sizes allow you to make medium or fine lines, dots and letters. They may also be used with certain g...
4” Bamboo Cane Horseshoe Handle with Top KnotPlease Note: Handle sizes may vary slightly since they are handmade. Handles can be soaked in warm water and bent slightly to fit as needed.
Composition Wood Cork
Pug Cutter The pug cutter is an attachment that provides a convenient means for cutting clay logs into preferred lengths. The pug cutter can easily be mounted to the bosses located on the bottom side of the pugmill nozzle. Once the pug cutter is attached, simple align the cutter to allow clearance for the stainless steel cutting wire and tight...
Plastic caps that fit onto 2oz. Stroke & Coat bottles. No metal tips included. Plastic tips can be cut at various sizes.
Impact resistant safety glasses for looking into kilns during firing. Green 2.5 polycarbonate IR lens. Good for viewing kilns up to 2950deg. f. Meets or exceeds ANSI Z87.1 1989 requirement.
Plastic bottle with plastic tip and metal screw on tip.pinkwhistlesocietyludes needle to keep tip clog free.
General duty heat resistant gloves. 14” long, durable coqhide with cloth lining. Good to 250deg. f. Good for removing peep plugs, closing hot kiln lids or removing ware after firing.
Brass Finish. 3 3/4" long. Shaft is 1 3/4" long x 5/8" diameter.
Plastic bottles with plastic tips that can be cut at various lengths for different size openings.
Use to mask areas for achieving crisp edge lines and shapes. 12MM wide (.472”)
Pump has a 5 1/4" long dip tube. Cork is 1.25” at the top and 1.05” at the bottom.
Adjustable Stand (Pugmill Notpinkwhistlesocietyluded) This heavy duty stand has two Canadian birch shelves, and multiple mounting holes which allows the stand to be adjusted to a proper ergonomic height. The Adjustable Stand has been designed to work in conjunction with the following models: VPM-7/7SS VPM-9/9SS VPM-20/20SS
Paragon Upgrades and Accessories
FREE Deluxe 18 inch Rolling StandParagon 7-, 8-, 10-, and 12-sided top-loading ceramic and glass kilns now come with a deluxe rolling stand at no extra charge. The new stand has locking casters, a mounting bracket for the Orton Kiln Vent, and a greenware drying rack. You will enjoy the convenience of effortlessly moving the kiln out of the way...
Trace designs onto ware or glazed surface. Lines burn away and leave no residue when fired.
Red Rubber Stoppers
Lid or Door Safety SwitchThe optional lid or door safety switch turns off power to the heating elements when the lid is raised or door is opened. The controller remains powered. The switch turns the power to the elements back on when the lid is closed. The switch mounts to the back of the lid or front of the door. IMPORTANT: The lid or door sa...
Sentry 12 Key Controller UpgradeThis kiln can be ordered with the optional Sentry 12-key controller instead of the standard Sentry Xpress 3-key controller. The upgrade price is only for a Sentry 12-key ordered with a new kiln. Controller Comparison Because you can type numbers into the 12-key Sentry, it is faster to program than the 3-key. (...
Skutt Element Accessories
KilnParts.com Part Numbers 1000111 Skutt Part Numbers 1018Straight pins are used to hold elements in their channels. When you buy new Skutt elements you will receive new pins, but if you have lost pins or have broken brick bricks and need additional pins to hold your elements in place these are the same Skutt pins you get with a new element.
4” Square Bamboo Cane HandlePlease Note: Handle sizes may vary slightly since they are handmade. Handles can be soaked in warm water and bent slightly to fit as needed.