Bracker Raku Kiln Kit
- Raku Kiln Kit Contents
- Complete Kit includes:
- 1 Bracker Raku Kiln
- 1 100,000 BTU Natural Draft Burner
- 1 case 2600ºF Soft Insulating Firebrick
- 1 15 1/2” Round Kiln Shelf
- 5# Crackle White Raku Glaze
- 1 pair Raku Tongs (specify RK37 or RK45) •
- 1 Pair Leather Welder’s Gloves !
- Upgrade to 500,000 BTU Torch for $25 extra (should only be used with propane tanks larger than 30#) !!!!!
The Bracker Raku Kiln is a lightweight and portable design for firing ceramic pieces in your own backyard. The kiln Bracker's makes today was designed by Bill Bracker in the early 1970’s utilizing the technology of ceramic fiber. The kiln is made by lining a cage of wire fence material and a metal garbage can lid with one-half inch thick fiber blanket. The fiber is then rigidized with a mixture of sodium silicate and water. The use of the fiber allows the ceramicist to have the insulating qualities of 21/2 inches of soft insulating firebrick, yet it is light enough that anyone is able to pick it up. In addition to the items in the Raku Kit, you’ll need to have a few other basic things on hand for a successful raku firing: a metal tub for water (stops the re-oxidation process after reduction), one or more metal garbage cans or tubs for reducing plus reduction materials (such as leaves, sawdust, pine needles, etc.) and a water supply (hose or extra bucket or tub of water for emergency situations and accidents). Setting up involves laying out the pad (you may also use an old kiln lid in place of the pad of firebricks), posting the shelf on the pad, setting the pieces to be fired on the shelf, placing the kiln over the shelf and pieces, attaching the burner to the tank, placing the burner in front of the kiln’s burner port, and lighting the burner. Initial firings in a cold kiln should take less than one hour and successive firings should take around thirty to forty minutes.