KPS is open for in person shopping. Masks are required.

Skutt KM and KMT Control Parts

Sort by:
{"id":6544463331391,"title":"Skutt Type K Thermocouple Replacement – Element Only – 8 Gauge","handle":"1000117","description":"KilnParts.com Part Numbers\u003cbr\u003e 1000117\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1515\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ctable style=\"width: 100%;\" border=\"0\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eSkutt Part Description\u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003eSkutt Part Number\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cdiv dir=\"ltr\" data-font-name=\"g_font_51_0\" data-canvas-width=\"233.3417492284775\"\u003eType K Thermocouple Replacement - Element Only (8 ga.)\u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e1515\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003ca href=\"http:\/\/kilnparts.com\/PDF\/Skutt_Parts_Price_List_2013.pdf\"\u003e\u003cbr\u003e Download the entire Skutt Parts Price List (PDF 155K)\u003c\/a\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv style=\"height: 245px important!; display: block; width: 100%;\"\u003e \u003cp style=\"text-align: center;\"\u003eChanging a Thermocouple\u003c\/p\u003e \u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/uUehp51k3is\" frameborder=\"0\" allowfullscreen\u003e\u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/dBSzl9Vjijs\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e ","published_at":"2021-03-03T06:33:41-06:00","created_at":"2021-03-03T06:33:42-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":1800,"price_min":1800,"price_max":1800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254998286399,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000117","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type K Thermocouple Replacement – Element Only – 8 Gauge","public_title":null,"options":["Default Title"],"price":1800,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1515_web_0ccccf65-d19d-4856-a088-a247020247b8.jpg?v=1637017192"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1515_web_0ccccf65-d19d-4856-a088-a247020247b8.jpg?v=1637017192","options":["Title"],"media":[{"alt":null,"id":21307267612735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1515_web_0ccccf65-d19d-4856-a088-a247020247b8.jpg?v=1637017192"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1515_web_0ccccf65-d19d-4856-a088-a247020247b8.jpg?v=1637017192","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"KilnParts.com Part Numbers\u003cbr\u003e 1000117\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1515\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ctable style=\"width: 100%;\" border=\"0\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eSkutt Part Description\u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003eSkutt Part Number\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cdiv dir=\"ltr\" data-font-name=\"g_font_51_0\" data-canvas-width=\"233.3417492284775\"\u003eType K Thermocouple Replacement - Element Only (8 ga.)\u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e1515\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003ca href=\"http:\/\/kilnparts.com\/PDF\/Skutt_Parts_Price_List_2013.pdf\"\u003e\u003cbr\u003e Download the entire Skutt Parts Price List (PDF 155K)\u003c\/a\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv style=\"height: 245px important!; display: block; width: 100%;\"\u003e \u003cp style=\"text-align: center;\"\u003eChanging a Thermocouple\u003c\/p\u003e \u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/uUehp51k3is\" frameborder=\"0\" allowfullscreen\u003e\u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/dBSzl9Vjijs\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e "}
Skutt Type K Thermocouple Replacement – Element Only – 8 Gauge

Skutt Type K Thermocouple Replacement – Element Only – 8 Gauge

€18.00

KilnParts.com Part Numbers 1000117 Skutt Part Numbers 1515How do I know what thermocouple I need for my kiln? Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. The only thing you...


More Info
Skutt Relay – 25 Amp (Black Case)

Skutt KM and KMT Control Parts

€36.00
{"id":6544463724607,"title":"Skutt Relay – 25 Amp (Black Case)","handle":"1000123","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000123\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2139C01094\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need black or clear case relays for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Please review the PDF that can be found under the \"PDF Files\" tab above. It covers relay installation and will clarify which relays you need for your kiln.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMy relays are wearing out quickly. Why? \u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e If you find yourself replacing relays more often than you should, there are a few possible causes:\u003c\/p\u003e \u003cp\u003e1. Your kiln is not running on the correct voltgae and is pulling more amperage than the relays are rated for. Verify the building voltage and kiln voltage to ensure they match.\u003c\/p\u003e \u003cp\u003e2. If your Skutt kiln has 14 gauge feeder wires you can replace them with 12 gauge feeder wires which will help extend the life of your elements by keeping them cooler.\u003c\/p\u003e \u003cp\u003e3. Make sure the connections from your wires to the relays are clean and tight. If the connections are loose or they are corroded it will cause them to fail prematurely.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_general.pdf\"\u003eGeneral Relay Information and how to Tell Which Relays You Need\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_gm1414_1phase.pdf\"\u003eRelay Replacement - GM1414 Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1018_km818_1phase.pdf\"\u003eRelay Replacement - KM1018 and KM818 Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1027_km1227_1phase.pdf\"\u003eRelay Replacement - KM1027 and KM1227 - Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1027_km1227_3phase.pdf\"\u003eRelay Replacement - KM1027 and KM1227 - Three Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1218_1phase.pdf\"\u003eRelay Replacement - KM1218 - Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1218_3phase.pdf\"\u003eRelay Replacement - KM1218 - Three Phase\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:33:50-06:00","created_at":"2021-03-03T06:33:51-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":3600,"price_min":3600,"price_max":3600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999498815,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000123","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Relay – 25 Amp (Black Case)","public_title":null,"options":["Default Title"],"price":3600,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2139C01094_web_54af86d3-31e2-446e-b241-07e1ec46a334.jpg?v=1637017200"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2139C01094_web_54af86d3-31e2-446e-b241-07e1ec46a334.jpg?v=1637017200","options":["Title"],"media":[{"alt":null,"id":21307268956223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2139C01094_web_54af86d3-31e2-446e-b241-07e1ec46a334.jpg?v=1637017200"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2139C01094_web_54af86d3-31e2-446e-b241-07e1ec46a334.jpg?v=1637017200","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000123\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2139C01094\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need black or clear case relays for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Please review the PDF that can be found under the \"PDF Files\" tab above. It covers relay installation and will clarify which relays you need for your kiln.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMy relays are wearing out quickly. Why? \u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e If you find yourself replacing relays more often than you should, there are a few possible causes:\u003c\/p\u003e \u003cp\u003e1. Your kiln is not running on the correct voltgae and is pulling more amperage than the relays are rated for. Verify the building voltage and kiln voltage to ensure they match.\u003c\/p\u003e \u003cp\u003e2. If your Skutt kiln has 14 gauge feeder wires you can replace them with 12 gauge feeder wires which will help extend the life of your elements by keeping them cooler.\u003c\/p\u003e \u003cp\u003e3. Make sure the connections from your wires to the relays are clean and tight. If the connections are loose or they are corroded it will cause them to fail prematurely.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_general.pdf\"\u003eGeneral Relay Information and how to Tell Which Relays You Need\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_gm1414_1phase.pdf\"\u003eRelay Replacement - GM1414 Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1018_km818_1phase.pdf\"\u003eRelay Replacement - KM1018 and KM818 Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1027_km1227_1phase.pdf\"\u003eRelay Replacement - KM1027 and KM1227 - Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1027_km1227_3phase.pdf\"\u003eRelay Replacement - KM1027 and KM1227 - Three Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1218_1phase.pdf\"\u003eRelay Replacement - KM1218 - Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1218_3phase.pdf\"\u003eRelay Replacement - KM1218 - Three Phase\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Relay – 25 Amp (Black Case)

Skutt Relay – 25 Amp (Black Case)

€36.00

KilnParts.com Part Numbers 1000123 Skutt Part Numbers 2139C01094How do I know if I need black or clear case relays for my kiln? Please review the PDF that can be found under the "PDF Files" tab above. It covers relay installation and will clarify which relays you need for your kiln. My relays are wearing out quickly. Why? If you find yourse...


More Info
Skutt Type K Thermocouple (8 Gauge) with Block and Wire

Skutt KM and KMT Control Parts

€35.00
{"id":6544463265855,"title":"Skutt Type K Thermocouple (8 Gauge) with Block and Wire","handle":"1000116","description":"KilnParts.com Part Numbers\u003cbr\u003e 1000116\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1506\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv style=\"height: 245px important!; display: block; width: 100%;\"\u003e \u003cp style=\"text-align: center;\"\u003eChanging a Thermocouple\u003c\/p\u003e \u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/uUehp51k3is\" frameborder=\"0\" allowfullscreen\u003e\u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/dBSzl9Vjijs\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e ","published_at":"2021-03-03T06:33:39-06:00","created_at":"2021-03-03T06:33:41-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":3500,"price_min":3500,"price_max":3500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254998220863,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000116","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type K Thermocouple (8 Gauge) with Block and Wire","public_title":null,"options":["Default Title"],"price":3500,"weight":136,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1506_web_896cc7c9-0193-4005-9e51-1830dda59cab.jpg?v=1637017190"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1506_web_896cc7c9-0193-4005-9e51-1830dda59cab.jpg?v=1637017190","options":["Title"],"media":[{"alt":null,"id":21307267481663,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1506_web_896cc7c9-0193-4005-9e51-1830dda59cab.jpg?v=1637017190"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1506_web_896cc7c9-0193-4005-9e51-1830dda59cab.jpg?v=1637017190","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"KilnParts.com Part Numbers\u003cbr\u003e 1000116\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1506\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv style=\"height: 245px important!; display: block; width: 100%;\"\u003e \u003cp style=\"text-align: center;\"\u003eChanging a Thermocouple\u003c\/p\u003e \u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/uUehp51k3is\" frameborder=\"0\" allowfullscreen\u003e\u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/dBSzl9Vjijs\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e "}
Skutt Type K Thermocouple (8 Gauge) with Block and Wire

Skutt Type K Thermocouple (8 Gauge) with Block and Wire

€35.00

KilnParts.com Part Numbers 1000116 Skutt Part Numbers 1506How do I know what thermocouple I need for my kiln? Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. The only thing you...


More Info
Skutt Fuse – .5 Amp for all KM Kilns

Skutt KM and KMT Control Parts

€1.50
{"id":6544465657919,"title":"Skutt Fuse – .5 Amp for all KM Kilns","handle":"1000148","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000148\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1921C01338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eBecause computer circuit boards are susceptible to damage by voltage surges, all computer controlled Skutt kilns have a .5 amp fuse to protect the electronics. Normally, you will see a very small, human hair, sized wire inside the small glass fuse. If you do not see a wire or you see a small burn mark you need to replace your fuse.\u003c\/p\u003e \u003cp\u003eIf your computer does not have a display, the first thing to check is the fuse. \u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:31-06:00","created_at":"2021-03-03T06:34:31-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":150,"price_min":150,"price_max":150,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255001104447,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000148","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Fuse – .5 Amp for all KM Kilns","public_title":null,"options":["Default Title"],"price":150,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1921C01338_web_c92c354e-74b3-42af-b826-456ed9c6a5c6.jpg?v=1637017244"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1921C01338_web_c92c354e-74b3-42af-b826-456ed9c6a5c6.jpg?v=1637017244","options":["Title"],"media":[{"alt":null,"id":21307272757311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1921C01338_web_c92c354e-74b3-42af-b826-456ed9c6a5c6.jpg?v=1637017244"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1921C01338_web_c92c354e-74b3-42af-b826-456ed9c6a5c6.jpg?v=1637017244","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000148\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1921C01338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eBecause computer circuit boards are susceptible to damage by voltage surges, all computer controlled Skutt kilns have a .5 amp fuse to protect the electronics. Normally, you will see a very small, human hair, sized wire inside the small glass fuse. If you do not see a wire or you see a small burn mark you need to replace your fuse.\u003c\/p\u003e \u003cp\u003eIf your computer does not have a display, the first thing to check is the fuse. \u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Fuse – .5 Amp for all KM Kilns

Skutt Fuse – .5 Amp for all KM Kilns

€1.50

KilnParts.com Part Numbers 1000148 Skutt Part Numbers 1921C01338Because computer circuit boards are susceptible to damage by voltage surges, all computer controlled Skutt kilns have a .5 amp fuse to protect the electronics. Normally, you will see a very small, human hair, sized wire inside the small glass fuse. If you do not see a wire or you s...


More Info
Skutt Feeder Wire Set – KM1227-3, KM1027, KM1027-3

Skutt KM and KMT Control Parts

€49.00
{"id":6544464511039,"title":"Skutt Feeder Wire Set – KM1227-3, KM1027, KM1027-3","handle":"1000140","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000140\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1583\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:08-06:00","created_at":"2021-03-03T06:34:08-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":4900,"price_min":4900,"price_max":4900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999990335,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000140","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Feeder Wire Set – KM1227-3, KM1027, KM1027-3","public_title":null,"options":["Default Title"],"price":4900,"weight":2270,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1583_web_af5e8ece-e081-45b8-ad19-7a19719fd7ff.jpg?v=1637017219"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1583_web_af5e8ece-e081-45b8-ad19-7a19719fd7ff.jpg?v=1637017219","options":["Title"],"media":[{"alt":null,"id":21307270791231,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1583_web_af5e8ece-e081-45b8-ad19-7a19719fd7ff.jpg?v=1637017219"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1583_web_af5e8ece-e081-45b8-ad19-7a19719fd7ff.jpg?v=1637017219","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000140\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1583\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Feeder Wire Set – KM1227-3, KM1027, KM1027-3

Skutt Feeder Wire Set – KM1227-3, KM1027, KM1027-3

€49.00

KilnParts.com Part Numbers 1000140 Skutt Part Numbers 1583Feeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on th...


More Info
Skutt Relay – 25 Amp (Clear Case)

Skutt KM and KMT Control Parts

€38.00
{"id":6544463757375,"title":"Skutt Relay – 25 Amp (Clear Case)","handle":"1000124","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000124\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1517\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need black or clear case relays for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Please review the PDF that can be found under the \"PDF Files\" tab above. It covers relay installation and will clarify which relays you need for your kiln.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMy relays are wearing out quickly. Why? \u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e If you find yourself replacing relays more often than you should, there are a few possible causes:\u003c\/p\u003e \u003cp\u003e1. Your kiln is not running on the correct voltgae and is pulling more amperage than the relays are rated for. Verify the building voltage and kiln voltage to ensure they match.\u003c\/p\u003e \u003cp\u003e2. If your Skutt kiln has 14 gauge feeder wires you can replace them with 12 gauge feeder wires which will help extend the life of your elements by keeping them cooler.\u003c\/p\u003e \u003cp\u003e3. Make sure the connections from your wires to the relays are clean and tight. If the connections are loose or they are corroded it will cause them to fail prematurely.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_general.pdf\"\u003eGeneral Relay Information and how to Tell Which Relays You Need\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_gm1414_1phase.pdf\"\u003eRelay Replacement - GM1414 Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1018_km818_1phase.pdf\"\u003eRelay Replacement - KM1018 and KM818 Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1027_km1227_1phase.pdf\"\u003eRelay Replacement - KM1027 and KM1227 - Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1027_km1227_3phase.pdf\"\u003eRelay Replacement - KM1027 and KM1227 - Three Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1218_1phase.pdf\"\u003eRelay Replacement - KM1218 - Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1218_3phase.pdf\"\u003eRelay Replacement - KM1218 - Three Phase\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:33:51-06:00","created_at":"2021-03-03T06:33:52-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":3800,"price_min":3800,"price_max":3800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999531583,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000124","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Relay – 25 Amp (Clear Case)","public_title":null,"options":["Default Title"],"price":3800,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1517_web_9b708e6c-1a60-48bb-b7c5-6b4de3d7d92d.jpg?v=1637017201"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1517_web_9b708e6c-1a60-48bb-b7c5-6b4de3d7d92d.jpg?v=1637017201","options":["Title"],"media":[{"alt":null,"id":21307269021759,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1517_web_9b708e6c-1a60-48bb-b7c5-6b4de3d7d92d.jpg?v=1637017201"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1517_web_9b708e6c-1a60-48bb-b7c5-6b4de3d7d92d.jpg?v=1637017201","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000124\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1517\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need black or clear case relays for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Please review the PDF that can be found under the \"PDF Files\" tab above. It covers relay installation and will clarify which relays you need for your kiln.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMy relays are wearing out quickly. Why? \u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e If you find yourself replacing relays more often than you should, there are a few possible causes:\u003c\/p\u003e \u003cp\u003e1. Your kiln is not running on the correct voltgae and is pulling more amperage than the relays are rated for. Verify the building voltage and kiln voltage to ensure they match.\u003c\/p\u003e \u003cp\u003e2. If your Skutt kiln has 14 gauge feeder wires you can replace them with 12 gauge feeder wires which will help extend the life of your elements by keeping them cooler.\u003c\/p\u003e \u003cp\u003e3. Make sure the connections from your wires to the relays are clean and tight. If the connections are loose or they are corroded it will cause them to fail prematurely.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_general.pdf\"\u003eGeneral Relay Information and how to Tell Which Relays You Need\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_gm1414_1phase.pdf\"\u003eRelay Replacement - GM1414 Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1018_km818_1phase.pdf\"\u003eRelay Replacement - KM1018 and KM818 Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1027_km1227_1phase.pdf\"\u003eRelay Replacement - KM1027 and KM1227 - Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1027_km1227_3phase.pdf\"\u003eRelay Replacement - KM1027 and KM1227 - Three Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1218_1phase.pdf\"\u003eRelay Replacement - KM1218 - Single Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/relay_replacement_km1218_3phase.pdf\"\u003eRelay Replacement - KM1218 - Three Phase\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Relay – 25 Amp (Clear Case)

Skutt Relay – 25 Amp (Clear Case)

€38.00

KilnParts.com Part Numbers 1000124 Skutt Part Numbers 1517How do I know if I need black or clear case relays for my kiln? Please review the PDF that can be found under the "PDF Files" tab above. It covers relay installation and will clarify which relays you need for your kiln. My relays are wearing out quickly. Why? If you find yourself rep...


More Info
Skutt Current Sensor

Skutt KM and KMT Control Parts

€45.00
{"id":6544465068095,"title":"Skutt Current Sensor","handle":"1000567","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000567\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2648\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe current sensor is a device that will allow you to read the Voltage and Amperage of your kiln through use of the Diagnostic Menu options on your controller. It is to be used in conjunction with the KilnMaster and GlassMaster 700 Boards. If your kiln was manufactured with a 700 board than you should already have a current sensor installed in your kiln. \u003c\/p\u003e\u003cp\u003e In order to operate properly, the sensing coil of the current sensor must be placed over some of the wires that connect the power cord terminal block to the kiln’s relays. Usually the kiln will have two or three relays. It is only necessary to pull one wire from each relay and thread it through the sensing coil, then reconnect the wires. \u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","published_at":"2021-03-03T06:34:20-06:00","created_at":"2021-03-03T06:34:21-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":4500,"price_min":4500,"price_max":4500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000547391,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000567","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Current Sensor","public_title":null,"options":["Default Title"],"price":4500,"weight":200,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2648_web_f89f098d-d092-4d5f-a5c5-6ebd1ae5914c.jpg?v=1637017232"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2648_web_f89f098d-d092-4d5f-a5c5-6ebd1ae5914c.jpg?v=1637017232","options":["Title"],"media":[{"alt":null,"id":21307271708735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2648_web_f89f098d-d092-4d5f-a5c5-6ebd1ae5914c.jpg?v=1637017232"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2648_web_f89f098d-d092-4d5f-a5c5-6ebd1ae5914c.jpg?v=1637017232","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000567\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2648\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe current sensor is a device that will allow you to read the Voltage and Amperage of your kiln through use of the Diagnostic Menu options on your controller. It is to be used in conjunction with the KilnMaster and GlassMaster 700 Boards. If your kiln was manufactured with a 700 board than you should already have a current sensor installed in your kiln. \u003c\/p\u003e\u003cp\u003e In order to operate properly, the sensing coil of the current sensor must be placed over some of the wires that connect the power cord terminal block to the kiln’s relays. Usually the kiln will have two or three relays. It is only necessary to pull one wire from each relay and thread it through the sensing coil, then reconnect the wires. \u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e"}
Skutt Current Sensor

Skutt Current Sensor

€45.00

KilnParts.com Part Numbers 1000567 Skutt Part Numbers 2648The current sensor is a device that will allow you to read the Voltage and Amperage of your kiln through use of the Diagnostic Menu options on your controller. It is to be used in conjunction with the KilnMaster and GlassMaster 700 Boards. If your kiln was manufactured with a 700 board t...


More Info
{"id":6544456613951,"title":"Skutt KM Harness Wire Set – KM1227, KM1027, KM1222, KM1022, KM1022-3, KM822, KM822-3","handle":"1000129_130","description":"\u003cp\u003eHarness wires connect the power cord block to the line side of the relays and also connect the load side of the relays to the back of the terminal strip. Harness wire kits include all necessary red lead wires to replace your current wires.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy do the replacement harness wire sets have yellow electrical connectors and the old ones have blue connectors on the relays?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAll new harness wire sets use 12 Gauge wire rather than 14 gauge wire. If your kiln has light blue connectors on the harness wires and they show any signs of wear (corroded connections, discolored wires or burned connections) you should replace your harness wires with a new set of 12 gauge wires. The larger wires will help extend relay life by keeping them cooler. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWill these harness wires fit my kiln if I have black relays or clear relays?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eBoth black and clear case relays use the same harness wire sets. For information on the different types of relays please \u003ca href=\"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0272\/1968\/9606\/files\/Replacing_Standard_Relays.pdf?v=1593277498\" title=\"Repairs and Maintenance - Kilns - Relays\"\u003ereview this document\u003c\/a\u003e. Changing out your harness wires may necessitate changing your relays as well. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kilnparts-com.myshopify.com\/pages\/repairs-and-maintenance-kilns-km-wiring-harness-repalcement\" title=\"Repairs and Maintenance - Kilns - KM Wiring Harness Replacement\"\u003eRepairs and Maintenance - Kilns - KM Wiring Harness Replacement\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSkutt Part Number \/ pinkwhistlesociety Part Number\u003c\/strong\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003cspan\u003eSingle Phase\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e2560 \/ \u003c\/span\u003e1000129\u003cbr\u003eThree Phase\u003cbr\u003e2561 \/ 1000130\u003c\/p\u003e","published_at":"2021-03-03T06:29:43-06:00","created_at":"2021-03-03T06:29:43-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":4000,"price_min":4000,"price_max":4100,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254985703487,"title":"Single Phase","option1":"Single Phase","option2":null,"option3":null,"sku":"1000129","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt KM Harness Wire Set – KM1227, KM1027, KM1222, KM1022, KM1022-3, KM822, KM822-3 - Single Phase","public_title":"Single Phase","options":["Single Phase"],"price":4000,"weight":341,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39254985736255,"title":"Three Phase","option1":"Three Phase","option2":null,"option3":null,"sku":"1000130","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt KM Harness Wire Set – KM1227, KM1027, KM1222, KM1022, KM1022-3, KM822, KM822-3 - Three Phase","public_title":"Three Phase","options":["Three Phase"],"price":4100,"weight":341,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2560_web.gif?v=1637017445","\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2561_web.jpg?v=1637017445"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2560_web.gif?v=1637017445","options":["Phase"],"media":[{"alt":null,"id":21307288617023,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2560_web.gif?v=1637017445"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2560_web.gif?v=1637017445","width":500},{"alt":null,"id":21307288649791,"position":2,"preview_image":{"aspect_ratio":0.782,"height":639,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2561_web.jpg?v=1637017445"},"aspect_ratio":0.782,"height":639,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2561_web.jpg?v=1637017445","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHarness wires connect the power cord block to the line side of the relays and also connect the load side of the relays to the back of the terminal strip. Harness wire kits include all necessary red lead wires to replace your current wires.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy do the replacement harness wire sets have yellow electrical connectors and the old ones have blue connectors on the relays?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAll new harness wire sets use 12 Gauge wire rather than 14 gauge wire. If your kiln has light blue connectors on the harness wires and they show any signs of wear (corroded connections, discolored wires or burned connections) you should replace your harness wires with a new set of 12 gauge wires. The larger wires will help extend relay life by keeping them cooler. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWill these harness wires fit my kiln if I have black relays or clear relays?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eBoth black and clear case relays use the same harness wire sets. For information on the different types of relays please \u003ca href=\"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0272\/1968\/9606\/files\/Replacing_Standard_Relays.pdf?v=1593277498\" title=\"Repairs and Maintenance - Kilns - Relays\"\u003ereview this document\u003c\/a\u003e. Changing out your harness wires may necessitate changing your relays as well. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kilnparts-com.myshopify.com\/pages\/repairs-and-maintenance-kilns-km-wiring-harness-repalcement\" title=\"Repairs and Maintenance - Kilns - KM Wiring Harness Replacement\"\u003eRepairs and Maintenance - Kilns - KM Wiring Harness Replacement\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSkutt Part Number \/ pinkwhistlesociety Part Number\u003c\/strong\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003cspan\u003eSingle Phase\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e2560 \/ \u003c\/span\u003e1000129\u003cbr\u003eThree Phase\u003cbr\u003e2561 \/ 1000130\u003c\/p\u003e"}
Skutt KM Harness Wire Set – KM1227, KM1027, KM1222, KM1022, KM1022-3, KM822, KM822-3

Skutt KM Harness Wire Set – KM1227, KM1027, KM1222, KM1022, KM1022-3, KM822, KM822-3

€40.00

Harness wires connect the power cord block to the line side of the relays and also connect the load side of the relays to the back of the terminal strip. Harness wire kits include all necessary red lead wires to replace your current wires. Why do the replacement harness wire sets have yellow electrical connectors and the old ones have blue conne...


More Info
Skutt Fuse Holder for .5 Amp Fuse

Skutt KM and KMT Control Parts

€8.00
{"id":6544465723455,"title":"Skutt Fuse Holder for .5 Amp Fuse","handle":"1000149","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000149\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1904C01358\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eBecause computer circuit boards are susceptible to damage by voltage surges, all computer controlled Skutt kilns have a .5 amp fuse to protect the electronics. \u003c\/p\u003e \u003cp\u003eThis fuse holder fits all computerized Skutt kilns and wall mount controllers.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:32-06:00","created_at":"2021-03-03T06:34:33-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":800,"price_min":800,"price_max":800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255001169983,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000149","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Fuse Holder for .5 Amp Fuse","public_title":null,"options":["Default Title"],"price":800,"weight":50,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1904C01338_web_c3b1886a-7762-4bee-b713-5a03dfa4de92.jpg?v=1637017245"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1904C01338_web_c3b1886a-7762-4bee-b713-5a03dfa4de92.jpg?v=1637017245","options":["Title"],"media":[{"alt":null,"id":21307272822847,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1904C01338_web_c3b1886a-7762-4bee-b713-5a03dfa4de92.jpg?v=1637017245"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1904C01338_web_c3b1886a-7762-4bee-b713-5a03dfa4de92.jpg?v=1637017245","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000149\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1904C01358\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eBecause computer circuit boards are susceptible to damage by voltage surges, all computer controlled Skutt kilns have a .5 amp fuse to protect the electronics. \u003c\/p\u003e \u003cp\u003eThis fuse holder fits all computerized Skutt kilns and wall mount controllers.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Fuse Holder for .5 Amp Fuse

Skutt Fuse Holder for .5 Amp Fuse

€8.00

KilnParts.com Part Numbers 1000149 Skutt Part Numbers 1904C01358Because computer circuit boards are susceptible to damage by voltage surges, all computer controlled Skutt kilns have a .5 amp fuse to protect the electronics. This fuse holder fits all computerized Skutt kilns and wall mount controllers.


More Info
{"id":6544464937023,"title":"Skutt Touchpad with Circuit Board (For Standard Type K Thermocouple)","handle":"1000150","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000150\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1507\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eAll Skutt kilns and wall mount controllers use the same touchpad regardless of age. The touchpad unit comes complete with the circuit board and touchpad. No mounting screws are included.\u003c\/p\u003e \u003cp\u003eBy default, the touchpad comes configured for a Type K thermocouple (the most common and least expensive for kilns), but it is available configured for an S-Type thermocouple as well. Please contact us if you need to order a new touchpad for an S-Type thermocouple.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/touchpad_replacement.pdf\"\u003eTouchpad Replacement\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:18-06:00","created_at":"2021-03-03T06:34:19-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":35000,"price_min":35000,"price_max":35000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000416319,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000150","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Touchpad with Circuit Board (For Standard Type K Thermocouple)","public_title":null,"options":["Default Title"],"price":35000,"weight":1362,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1507_web_74161543-2bee-4a79-bea8-b9f6e1539519.jpg?v=1637017229"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1507_web_74161543-2bee-4a79-bea8-b9f6e1539519.jpg?v=1637017229","options":["Title"],"media":[{"alt":null,"id":21307271544895,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1507_web_74161543-2bee-4a79-bea8-b9f6e1539519.jpg?v=1637017229"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1507_web_74161543-2bee-4a79-bea8-b9f6e1539519.jpg?v=1637017229","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000150\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1507\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eAll Skutt kilns and wall mount controllers use the same touchpad regardless of age. The touchpad unit comes complete with the circuit board and touchpad. No mounting screws are included.\u003c\/p\u003e \u003cp\u003eBy default, the touchpad comes configured for a Type K thermocouple (the most common and least expensive for kilns), but it is available configured for an S-Type thermocouple as well. Please contact us if you need to order a new touchpad for an S-Type thermocouple.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/touchpad_replacement.pdf\"\u003eTouchpad Replacement\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Touchpad with Circuit Board (For Standard Type K Thermocouple)

Skutt Touchpad with Circuit Board (For Standard Type K Thermocouple)

€350.00

KilnParts.com Part Numbers 1000150 Skutt Part Numbers 1507All Skutt kilns and wall mount controllers use the same touchpad regardless of age. The touchpad unit comes complete with the circuit board and touchpad. No mounting screws are included. By default, the touchpad comes configured for a Type K thermocouple (the most common and least expens...


More Info
Skutt Transformer for all KM Kilns and KM-1 Wall Mount

Skutt KM and KMT Control Parts

€39.00
{"id":6544464904255,"title":"Skutt Transformer for all KM Kilns and KM-1 Wall Mount","handle":"1000146","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000146\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1518\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eAll Skutt kilns that have a computer controller use the same transformer. The transfomer takes the building's voltage of 240\/208\/120V AC and reduces it to 12\/24V AC to run the computer board and relays.\u003c\/p\u003e \u003cp\u003eIf you suspect your transfomer is bad, carefully inspect the metal tabs at the top. Each one should have a very small copper wire soldered to it. If one of those connections is broken, you must replace the transformer.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:17-06:00","created_at":"2021-03-03T06:34:18-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":3900,"price_min":3900,"price_max":3900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000383551,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000146","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Transformer for all KM Kilns and KM-1 Wall Mount","public_title":null,"options":["Default Title"],"price":3900,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1518_web_3d465f60-405a-4e83-a962-ca423abe129c.jpg?v=1637017228"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1518_web_3d465f60-405a-4e83-a962-ca423abe129c.jpg?v=1637017228","options":["Title"],"media":[{"alt":null,"id":21307271479359,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1518_web_3d465f60-405a-4e83-a962-ca423abe129c.jpg?v=1637017228"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1518_web_3d465f60-405a-4e83-a962-ca423abe129c.jpg?v=1637017228","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000146\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1518\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eAll Skutt kilns that have a computer controller use the same transformer. The transfomer takes the building's voltage of 240\/208\/120V AC and reduces it to 12\/24V AC to run the computer board and relays.\u003c\/p\u003e \u003cp\u003eIf you suspect your transfomer is bad, carefully inspect the metal tabs at the top. Each one should have a very small copper wire soldered to it. If one of those connections is broken, you must replace the transformer.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Transformer for all KM Kilns and KM-1 Wall Mount

Skutt Transformer for all KM Kilns and KM-1 Wall Mount

€39.00

KilnParts.com Part Numbers 1000146 Skutt Part Numbers 1518All Skutt kilns that have a computer controller use the same transformer. The transfomer takes the building's voltage of 240/208/120V AC and reduces it to 12/24V AC to run the computer board and relays. If you suspect your transfomer is bad, carefully inspect the metal tabs at the top. E...


More Info
{"id":6544463396927,"title":"Skutt Type K Thermocouple Replacement – Element Only – 8 Gauge Bent","handle":"1000552","description":"\u003cp\u003eBent at 90 degrees, fits Firebox 8x4 and 8x6 models ONLY\u003c\/p\u003e\u003cp\u003eKilnParts.com Part Numbers\u003cbr\u003e 1000117\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1515\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ctable style=\"width: 100%;\" border=\"0\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eSkutt Part Description\u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003eSkutt Part Number\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cdiv dir=\"ltr\" data-font-name=\"g_font_51_0\" data-canvas-width=\"233.3417492284775\"\u003eType K Thermocouple Replacement - Element Only (8 ga.)\u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e1515\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003ca href=\"http:\/\/kilnparts.com\/PDF\/Skutt_Parts_Price_List_2013.pdf\"\u003e\u003cbr\u003e Download the entire Skutt Parts Price List (PDF 155K)\u003c\/a\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv style=\"height: 245px important!; display: block; width: 100%;\"\u003e \u003cp style=\"text-align: center;\"\u003eChanging a Thermocouple\u003c\/p\u003e \u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/uUehp51k3is\" frameborder=\"0\" allowfullscreen\u003e\u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/dBSzl9Vjijs\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e ","published_at":"2021-03-03T06:33:42-06:00","created_at":"2021-03-03T06:33:43-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":1700,"price_min":1700,"price_max":1700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254998319167,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000552","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type K Thermocouple Replacement – Element Only – 8 Gauge Bent","public_title":null,"options":["Default Title"],"price":1700,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_727e708b-dfad-4678-ad93-fe1fd5bbd22e.jpg?v=1637017193"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_727e708b-dfad-4678-ad93-fe1fd5bbd22e.jpg?v=1637017193","options":["Title"],"media":[{"alt":null,"id":21307267776575,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_727e708b-dfad-4678-ad93-fe1fd5bbd22e.jpg?v=1637017193"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_727e708b-dfad-4678-ad93-fe1fd5bbd22e.jpg?v=1637017193","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBent at 90 degrees, fits Firebox 8x4 and 8x6 models ONLY\u003c\/p\u003e\u003cp\u003eKilnParts.com Part Numbers\u003cbr\u003e 1000117\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1515\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ctable style=\"width: 100%;\" border=\"0\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eSkutt Part Description\u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003eSkutt Part Number\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cdiv dir=\"ltr\" data-font-name=\"g_font_51_0\" data-canvas-width=\"233.3417492284775\"\u003eType K Thermocouple Replacement - Element Only (8 ga.)\u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e1515\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003ca href=\"http:\/\/kilnparts.com\/PDF\/Skutt_Parts_Price_List_2013.pdf\"\u003e\u003cbr\u003e Download the entire Skutt Parts Price List (PDF 155K)\u003c\/a\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv style=\"height: 245px important!; display: block; width: 100%;\"\u003e \u003cp style=\"text-align: center;\"\u003eChanging a Thermocouple\u003c\/p\u003e \u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/uUehp51k3is\" frameborder=\"0\" allowfullscreen\u003e\u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/dBSzl9Vjijs\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e "}
Skutt Type K Thermocouple Replacement – Element Only – 8 Gauge Bent

Skutt Type K Thermocouple Replacement – Element Only – 8 Gauge Bent

€17.00

Bent at 90 degrees, fits Firebox 8x4 and 8x6 models ONLYKilnParts.com Part Numbers 1000117 Skutt Part Numbers 1515How do I know what thermocouple I need for my kiln? Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can ...


More Info
{"id":6544465297471,"title":"Skutt Type K Thermocouple Lead Wire with Connectors for 27” Deep Kilns","handle":"1000155","description":"KilnParts.com Part Numbers\u003cbr\u003e 1000155\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2237\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLead wire for Type K thermocouple. Wire includes female tabs for attaching to the terminal strip and the ends are pre-stripped to insert into the terminal block.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple, the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:26-06:00","created_at":"2021-03-03T06:34:26-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":["(CE-KM)","12V","2139","2139c01094","DC","P\u0026B","Relay"],"price":800,"price_min":800,"price_max":800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000776767,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000155","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type K Thermocouple Lead Wire with Connectors for 27” Deep Kilns","public_title":null,"options":["Default Title"],"price":800,"weight":50,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2237_web_335aa19d-d967-46e3-852e-7d86c7a1b148.jpg?v=1637017238"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2237_web_335aa19d-d967-46e3-852e-7d86c7a1b148.jpg?v=1637017238","options":["Title"],"media":[{"alt":null,"id":21307272101951,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2237_web_335aa19d-d967-46e3-852e-7d86c7a1b148.jpg?v=1637017238"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2237_web_335aa19d-d967-46e3-852e-7d86c7a1b148.jpg?v=1637017238","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"KilnParts.com Part Numbers\u003cbr\u003e 1000155\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2237\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLead wire for Type K thermocouple. Wire includes female tabs for attaching to the terminal strip and the ends are pre-stripped to insert into the terminal block.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple, the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Type K Thermocouple Lead Wire with Connectors for 27” Deep Kilns

Skutt Type K Thermocouple Lead Wire with Connectors for 27” Deep Kilns

€8.00

KilnParts.com Part Numbers 1000155 Skutt Part Numbers 2237Lead wire for Type K thermocouple. Wire includes female tabs for attaching to the terminal strip and the ends are pre-stripped to insert into the terminal block. Do I need to replace the porcelain block and wire if I replace the thermocouple? No. As long as the wire and block are not dama...


More Info
Skutt Terminal Strip Replacement with Tabs

Skutt KM and KMT Control Parts

€30.00
{"id":6544465100863,"title":"Skutt Terminal Strip Replacement with Tabs","handle":"1000151","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000151\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1519\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThis terminal strip is used on several models of Skutt kilns. It is used on all KM kilns to connect the harness wires to the feeder wires and to connect the thermcouple wires through the heat baffle. PK kilns use this terminal strip to attach the three sets of thermocouple wires through the heat baffle.\u003c\/p\u003e \u003cp\u003eThis package inludes terminal strip, plastic label strip, tabs, mounting screws for tabs and screws for mounting to the heat baffle. \u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:22-06:00","created_at":"2021-03-03T06:34:22-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":3000,"price_min":3000,"price_max":3000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000580159,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000151","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Terminal Strip Replacement with Tabs","public_title":null,"options":["Default Title"],"price":3000,"weight":250,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1519_web_8b42cc76-d344-4723-8c46-0e2172383b4f.jpg?v=1637017233"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1519_web_8b42cc76-d344-4723-8c46-0e2172383b4f.jpg?v=1637017233","options":["Title"],"media":[{"alt":null,"id":21307271774271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1519_web_8b42cc76-d344-4723-8c46-0e2172383b4f.jpg?v=1637017233"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1519_web_8b42cc76-d344-4723-8c46-0e2172383b4f.jpg?v=1637017233","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000151\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1519\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThis terminal strip is used on several models of Skutt kilns. It is used on all KM kilns to connect the harness wires to the feeder wires and to connect the thermcouple wires through the heat baffle. PK kilns use this terminal strip to attach the three sets of thermocouple wires through the heat baffle.\u003c\/p\u003e \u003cp\u003eThis package inludes terminal strip, plastic label strip, tabs, mounting screws for tabs and screws for mounting to the heat baffle. \u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Terminal Strip Replacement with Tabs

Skutt Terminal Strip Replacement with Tabs

€30.00

KilnParts.com Part Numbers 1000151 Skutt Part Numbers 1519This terminal strip is used on several models of Skutt kilns. It is used on all KM kilns to connect the harness wires to the feeder wires and to connect the thermcouple wires through the heat baffle. PK kilns use this terminal strip to attach the three sets of thermocouple wires through ...


More Info
Skutt Relay – 50 Amp – Single Phase for KM-1 Wall Mount

Skutt KM and KMT Control Parts

€110.00
{"id":6544463790143,"title":"Skutt Relay – 50 Amp – Single Phase for KM-1 Wall Mount","handle":"1000125","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000125\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1982T20338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the KM-1 wall mount controller use a different style of relay than most other kilns? \u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e The higher amperage requirements of the KM-1 wall mount controller dictates that it must use a contactor capable of handling the increased amperage. \u003c\/p\u003e \u003cp\u003eThe KM-1 wall mount controller uses a different style contactor than all other kilns. Instead of using a 12v dc signal to drive the main relay, all KM-1 controllers use a 240\/208v ac signal to drive the main relay. Unfortunately the computer control board is not able to put out a signal with a high enough voltage to drive the main contactor so a small signal relay is used as well.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_three_phase.pdf\"\u003eKM1 Wall Mounted Controller - Three Phase - Wiring Diagram\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_single_phase.pdf\"\u003eKM1 Wall Mounted Controller - Single Phase - Wiring Diagram \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:33:53-06:00","created_at":"2021-03-03T06:33:53-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":11000,"price_min":11000,"price_max":11000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999564351,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000125","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Relay – 50 Amp – Single Phase for KM-1 Wall Mount","public_title":null,"options":["Default Title"],"price":11000,"weight":908,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1982T20338_web_5258e19f-ec86-4e11-a5fb-108af756e9a7.jpg?v=1637017202"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1982T20338_web_5258e19f-ec86-4e11-a5fb-108af756e9a7.jpg?v=1637017202","options":["Title"],"media":[{"alt":null,"id":21307269251135,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1982T20338_web_5258e19f-ec86-4e11-a5fb-108af756e9a7.jpg?v=1637017202"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1982T20338_web_5258e19f-ec86-4e11-a5fb-108af756e9a7.jpg?v=1637017202","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000125\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1982T20338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the KM-1 wall mount controller use a different style of relay than most other kilns? \u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e The higher amperage requirements of the KM-1 wall mount controller dictates that it must use a contactor capable of handling the increased amperage. \u003c\/p\u003e \u003cp\u003eThe KM-1 wall mount controller uses a different style contactor than all other kilns. Instead of using a 12v dc signal to drive the main relay, all KM-1 controllers use a 240\/208v ac signal to drive the main relay. Unfortunately the computer control board is not able to put out a signal with a high enough voltage to drive the main contactor so a small signal relay is used as well.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_three_phase.pdf\"\u003eKM1 Wall Mounted Controller - Three Phase - Wiring Diagram\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_single_phase.pdf\"\u003eKM1 Wall Mounted Controller - Single Phase - Wiring Diagram \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Relay – 50 Amp – Single Phase for KM-1 Wall Mount

Skutt Relay – 50 Amp – Single Phase for KM-1 Wall Mount

€110.00

KilnParts.com Part Numbers 1000125 Skutt Part Numbers 1982T20338Why does the KM-1 wall mount controller use a different style of relay than most other kilns? The higher amperage requirements of the KM-1 wall mount controller dictates that it must use a contactor capable of handling the increased amperage. The KM-1 wall mount controller uses ...


More Info
Skutt Type K Porcelain Thermocouple Block

Skutt KM and KMT Control Parts

€12.00
{"id":6544463495231,"title":"Skutt Type K Porcelain Thermocouple Block","handle":"1000118","description":"KilnParts.com Part Numbers\u003cbr\u003e 1000118\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1913O20338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv style=\"height: 245px important!; display: block; width: 100%;\"\u003e \u003cp style=\"text-align: center;\"\u003eChanging a Thermocouple\u003c\/p\u003e \u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/uUehp51k3is\" frameborder=\"0\" allowfullscreen\u003e\u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/dBSzl9Vjijs\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e ","published_at":"2021-03-03T06:33:43-06:00","created_at":"2021-03-03T06:33:44-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":1200,"price_min":1200,"price_max":1200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999105599,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000118","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type K Porcelain Thermocouple Block","public_title":null,"options":["Default Title"],"price":1200,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1913O20338_web_ed1af1fd-f990-4791-8ff6-3560480d56ae.jpg?v=1637017194"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1913O20338_web_ed1af1fd-f990-4791-8ff6-3560480d56ae.jpg?v=1637017194","options":["Title"],"media":[{"alt":null,"id":21307267973183,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1913O20338_web_ed1af1fd-f990-4791-8ff6-3560480d56ae.jpg?v=1637017194"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1913O20338_web_ed1af1fd-f990-4791-8ff6-3560480d56ae.jpg?v=1637017194","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"KilnParts.com Part Numbers\u003cbr\u003e 1000118\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1913O20338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv style=\"height: 245px important!; display: block; width: 100%;\"\u003e \u003cp style=\"text-align: center;\"\u003eChanging a Thermocouple\u003c\/p\u003e \u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/uUehp51k3is\" frameborder=\"0\" allowfullscreen\u003e\u003ciframe width=\"400\" height=\"225\" src=\"\/\/www.youtube.com\/embed\/dBSzl9Vjijs\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e "}
Skutt Type K Porcelain Thermocouple Block

Skutt Type K Porcelain Thermocouple Block

€12.00

KilnParts.com Part Numbers 1000118 Skutt Part Numbers 1913O20338How do I know what thermocouple I need for my kiln? Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. The only thi...


More Info
{"id":6544465133631,"title":"Skutt Terminal Block – Single Phase for all KM Single Phase Except 714","handle":"1000152","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000152\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1906C01338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe power cord terminal block for all single phase KM kilns except 714. This terminal block is also used on the heat baffle of PK kilns for harness wires. Does not include mounting screws, but does include terminal screws in the block.\u003c\/p\u003e \u003cp\u003eIf your terminal block is showing any signs of corrosion replacement is reccommended.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:23-06:00","created_at":"2021-03-03T06:34:23-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":1500,"price_min":1500,"price_max":1500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000612927,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000152","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Terminal Block – Single Phase for all KM Single Phase Except 714","public_title":null,"options":["Default Title"],"price":1500,"weight":200,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1906C01338_web_5a39d83f-d048-4b1a-83eb-d1ba6aba5d79.jpg?v=1637017235"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1906C01338_web_5a39d83f-d048-4b1a-83eb-d1ba6aba5d79.jpg?v=1637017235","options":["Title"],"media":[{"alt":null,"id":21307271938111,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1906C01338_web_5a39d83f-d048-4b1a-83eb-d1ba6aba5d79.jpg?v=1637017235"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1906C01338_web_5a39d83f-d048-4b1a-83eb-d1ba6aba5d79.jpg?v=1637017235","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000152\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1906C01338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe power cord terminal block for all single phase KM kilns except 714. This terminal block is also used on the heat baffle of PK kilns for harness wires. Does not include mounting screws, but does include terminal screws in the block.\u003c\/p\u003e \u003cp\u003eIf your terminal block is showing any signs of corrosion replacement is reccommended.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Terminal Block – Single Phase for all KM Single Phase Except 714

Skutt Terminal Block – Single Phase for all KM Single Phase Except 714

€15.00

KilnParts.com Part Numbers 1000152 Skutt Part Numbers 1906C01338The power cord terminal block for all single phase KM kilns except 714. This terminal block is also used on the heat baffle of PK kilns for harness wires. Does not include mounting screws, but does include terminal screws in the block. If your terminal block is showing any signs of...


More Info
Skutt Relay – Pilot for all PK Kilns and KM-1 Wall Mount

Skutt KM and KMT Control Parts

€12.00
{"id":6544463888447,"title":"Skutt Relay – Pilot for all PK Kilns and KM-1 Wall Mount","handle":"1000128","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000128\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2010C01094\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eSkutt PK kilns and the KM-1 wall mount controllers both use a small signal relay to drive their main relays\/contactors. \u003c\/p\u003e \u003cp\u003eThe small red wires lead from the computer control board to the pilot relay and then a second set of wires lead to the main relay\/contactor.\u003c\/p\u003e \u003cp\u003eIf you are testing your kiln and do not have voltage at the element pigtials with the kiln running, either the main relay\/contactor could be bad or the small pilot relay could be bad.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/KM1227PK%201PH%20and%203PH.pdf\"\u003eKM1227PK Single Phase and Three Phase\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/KM1231PK%201PH%20and%203PH.pdf\"\u003e\u003cbr\u003e KM1231PK Single Phase and Three Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/KM1627PKLF%201PH%20and%203PH.pdf\"\u003eKM1627PK LF Single Phase and Three Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/KM1627PK%201PH%20and%203PH.pdf\"\u003eKM1627PK Single Phase and Three Phase \u003c\/a\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_three_phase.pdf\"\u003e\u003cbr\u003e \u003cbr\u003e KM1 Wall Mounted Controller - Three Phase - Wiring Diagram\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_single_phase.pdf\"\u003eKM1 Wall Mounted Controller - Single Phase - Wiring Diagram \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:33:56-06:00","created_at":"2021-03-03T06:33:56-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":1200,"price_min":1200,"price_max":1200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999662655,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000128","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Relay – Pilot for all PK Kilns and KM-1 Wall Mount","public_title":null,"options":["Default Title"],"price":1200,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2010C01094_web_6d6874b6-7ba7-4ac6-a1fb-fb9e532abd9f.jpg?v=1637017205"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2010C01094_web_6d6874b6-7ba7-4ac6-a1fb-fb9e532abd9f.jpg?v=1637017205","options":["Title"],"media":[{"alt":null,"id":21307269414975,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2010C01094_web_6d6874b6-7ba7-4ac6-a1fb-fb9e532abd9f.jpg?v=1637017205"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2010C01094_web_6d6874b6-7ba7-4ac6-a1fb-fb9e532abd9f.jpg?v=1637017205","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000128\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2010C01094\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eSkutt PK kilns and the KM-1 wall mount controllers both use a small signal relay to drive their main relays\/contactors. \u003c\/p\u003e \u003cp\u003eThe small red wires lead from the computer control board to the pilot relay and then a second set of wires lead to the main relay\/contactor.\u003c\/p\u003e \u003cp\u003eIf you are testing your kiln and do not have voltage at the element pigtials with the kiln running, either the main relay\/contactor could be bad or the small pilot relay could be bad.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/KM1227PK%201PH%20and%203PH.pdf\"\u003eKM1227PK Single Phase and Three Phase\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/KM1231PK%201PH%20and%203PH.pdf\"\u003e\u003cbr\u003e KM1231PK Single Phase and Three Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/KM1627PKLF%201PH%20and%203PH.pdf\"\u003eKM1627PK LF Single Phase and Three Phase\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/KM1627PK%201PH%20and%203PH.pdf\"\u003eKM1627PK Single Phase and Three Phase \u003c\/a\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_three_phase.pdf\"\u003e\u003cbr\u003e \u003cbr\u003e KM1 Wall Mounted Controller - Three Phase - Wiring Diagram\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_single_phase.pdf\"\u003eKM1 Wall Mounted Controller - Single Phase - Wiring Diagram \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Relay – Pilot for all PK Kilns and KM-1 Wall Mount

Skutt Relay – Pilot for all PK Kilns and KM-1 Wall Mount

€12.00

KilnParts.com Part Numbers 1000128 Skutt Part Numbers 2010C01094Skutt PK kilns and the KM-1 wall mount controllers both use a small signal relay to drive their main relays/contactors. The small red wires lead from the computer control board to the pilot relay and then a second set of wires lead to the main relay/contactor. If you are testing y...


More Info
{"id":6544463691839,"title":"Skutt Thermocouple Mounting Flange 1-4” for KM-1 Wall Mount Controller","handle":"1000122","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000122\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2117\u003cbr\u003e\u003cp\u003eSkutt thermocouple mounting flange for KM-1 wall mount M1 type thermocouple. .5\" inside diameter, .63\" outside diameter, 1.45\" flange diameter.pinkwhistlesocietyludes thumbscrew and two sheet metal screws.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:33:49-06:00","created_at":"2021-03-03T06:33:49-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":1900,"price_min":1900,"price_max":1900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999466047,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000122","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Thermocouple Mounting Flange 1-4” for KM-1 Wall Mount Controller","public_title":null,"options":["Default Title"],"price":1900,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2117_web_b86d6855-3e55-4d9c-b511-56a1d28f64d7.jpg?v=1637017199"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2117_web_b86d6855-3e55-4d9c-b511-56a1d28f64d7.jpg?v=1637017199","options":["Title"],"media":[{"alt":null,"id":21307268890687,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2117_web_b86d6855-3e55-4d9c-b511-56a1d28f64d7.jpg?v=1637017199"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2117_web_b86d6855-3e55-4d9c-b511-56a1d28f64d7.jpg?v=1637017199","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000122\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2117\u003cbr\u003e\u003cp\u003eSkutt thermocouple mounting flange for KM-1 wall mount M1 type thermocouple. .5\" inside diameter, .63\" outside diameter, 1.45\" flange diameter.pinkwhistlesocietyludes thumbscrew and two sheet metal screws.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Thermocouple Mounting Flange 1-4” for KM-1 Wall Mount Controller

Skutt Thermocouple Mounting Flange 1-4” for KM-1 Wall Mount Controller

€19.00

KilnParts.com Part Numbers 1000122 Skutt Part Numbers 2117Skutt thermocouple mounting flange for KM-1 wall mount M1 type thermocouple. .5" inside diameter, .63" outside diameter, 1.45" flange diameter.pinkwhistlesocietyludes thumbscrew and two sheet metal screws.


More Info
Skutt Fuse – 50 Amp for PK Kilns

Skutt KM and KMT Control Parts

€19.00
{"id":6544465625151,"title":"Skutt Fuse – 50 Amp for PK Kilns","handle":"1000147","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000147\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2212C01338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eBecause Skutt PK kilns draw over 48 amps, electrical codes require them to include fuses. These fuses are located in a fuse block behind the heat baffle in all PK kilns. \u003c\/p\u003e \u003cp\u003eNon-PK kilns do NOT use these fuses.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:30-06:00","created_at":"2021-03-03T06:34:30-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":1900,"price_min":1900,"price_max":1900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255001071679,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000147","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Fuse – 50 Amp for PK Kilns","public_title":null,"options":["Default Title"],"price":1900,"weight":25,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2212C01338_web_d2acfa3f-2a30-40c0-ae47-5bca8884ff81.jpg?v=1637017243"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2212C01338_web_d2acfa3f-2a30-40c0-ae47-5bca8884ff81.jpg?v=1637017243","options":["Title"],"media":[{"alt":null,"id":21307272462399,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2212C01338_web_d2acfa3f-2a30-40c0-ae47-5bca8884ff81.jpg?v=1637017243"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2212C01338_web_d2acfa3f-2a30-40c0-ae47-5bca8884ff81.jpg?v=1637017243","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000147\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2212C01338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eBecause Skutt PK kilns draw over 48 amps, electrical codes require them to include fuses. These fuses are located in a fuse block behind the heat baffle in all PK kilns. \u003c\/p\u003e \u003cp\u003eNon-PK kilns do NOT use these fuses.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Fuse – 50 Amp for PK Kilns

Skutt Fuse – 50 Amp for PK Kilns

€19.00

KilnParts.com Part Numbers 1000147 Skutt Part Numbers 2212C01338Because Skutt PK kilns draw over 48 amps, electrical codes require them to include fuses. These fuses are located in a fuse block behind the heat baffle in all PK kilns. Non-PK kilns do NOT use these fuses.


More Info
{"id":6544465363007,"title":"Skutt Type K Thermocouple Lead Wire with Connectors for 18” Deep Kilns","handle":"1000156","description":"KilnParts.com Part Numbers\u003cbr\u003e 1000156\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2236\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLead wire for Type K thermocouple. Wire includes female tabs for attaching to the terminal strip and the ends are pre-stripped to insert into the terminal block.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple, the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:27-06:00","created_at":"2021-03-03T06:34:27-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":750,"price_min":750,"price_max":750,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000842303,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000156","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type K Thermocouple Lead Wire with Connectors for 18” Deep Kilns","public_title":null,"options":["Default Title"],"price":750,"weight":50,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2236_web_ae4a09de-a8fb-4139-a354-83de17342212.jpg?v=1637017239"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2236_web_ae4a09de-a8fb-4139-a354-83de17342212.jpg?v=1637017239","options":["Title"],"media":[{"alt":null,"id":21307272167487,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2236_web_ae4a09de-a8fb-4139-a354-83de17342212.jpg?v=1637017239"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2236_web_ae4a09de-a8fb-4139-a354-83de17342212.jpg?v=1637017239","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"KilnParts.com Part Numbers\u003cbr\u003e 1000156\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2236\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLead wire for Type K thermocouple. Wire includes female tabs for attaching to the terminal strip and the ends are pre-stripped to insert into the terminal block.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple, the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/8_gauge_thermocouple_replacement.pdf\"\u003e8 Gauge Thermocouple Replacemet - Standard Thermocouple\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/thermocouple_replacement.pdf\"\u003e\u003cbr\u003e How to change your old M1 Sheath Type Thermocouple with a new style 8 Gauge Thermocouple\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Type K Thermocouple Lead Wire with Connectors for 18” Deep Kilns

Skutt Type K Thermocouple Lead Wire with Connectors for 18” Deep Kilns

€7.50

KilnParts.com Part Numbers 1000156 Skutt Part Numbers 2236Lead wire for Type K thermocouple. Wire includes female tabs for attaching to the terminal strip and the ends are pre-stripped to insert into the terminal block. Do I need to replace the porcelain block and wire if I replace the thermocouple? No. As long as the wire and block are not dama...


More Info
Skutt KM Harness Wire Set – Single Phase – KM1018, KM818

Skutt KM and KMT Control Parts

€31.00
{"id":6544463921215,"title":"Skutt KM Harness Wire Set – Single Phase – KM1018, KM818","handle":"1000133","description":"\u003cp\u003eHarness wires connect the power cord block to the line side of the relays and also connect the load side of the relays to the back of the terminal strip. Harness wire kits include all necessary red lead wires to replace your current wires.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy do the replacement harness wire sets have yellow electrical connectors and the old ones have blue connectors on the relays?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAll new harness wire sets use 12 Gauge wire rather than 14 gauge wire. If your kiln has light blue connectors on the harness wires and they show any signs of wear (corroded connections, discolored wires or burned connections) you should replace your harness wires with a new set of 12 gauge wires. The larger wires will help extend relay life by keeping them cooler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWill these harness wires fit my kiln if I have black relays or clear relays?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eBoth black and clear case relays use the same harness wire sets. For information on the different types of relays please \u003ca href=\"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0272\/1968\/9606\/files\/Replacing_Standard_Relays.pdf?v=1593277498\" title=\"Repairs and Maintenance - Kilns - Relays\"\u003ereview this document\u003c\/a\u003e. Changing out your harness wires may necessitate changing your relays as well.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kilnparts-com.myshopify.com\/pages\/repairs-and-maintenance-kilns-km-wiring-harness-repalcement\" title=\"Repairs and Maintenance - Kilns - KM Wiring Harness Replacement\"\u003eRepairs and Maintenance - Kilns - KM Wiring Harness Replacement\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSkutt Part Number \/ KilnParts.com Part Number\u003c\/strong\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003cspan\u003eSingle Phase\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e2564 \/ \u003c\/span\u003e1000133\u003cbr\u003e\u003c\/p\u003e","published_at":"2021-03-03T06:33:57-06:00","created_at":"2021-03-03T06:33:57-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":3100,"price_min":3100,"price_max":3100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999695423,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000133","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt KM Harness Wire Set – Single Phase – KM1018, KM818","public_title":null,"options":["Default Title"],"price":3100,"weight":341,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2564_web_5cfa0da5-4c3e-421e-901b-094b43328a2f.jpg?v=1637017209"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2564_web_5cfa0da5-4c3e-421e-901b-094b43328a2f.jpg?v=1637017209","options":["Title"],"media":[{"alt":null,"id":21307269873727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2564_web_5cfa0da5-4c3e-421e-901b-094b43328a2f.jpg?v=1637017209"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2564_web_5cfa0da5-4c3e-421e-901b-094b43328a2f.jpg?v=1637017209","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHarness wires connect the power cord block to the line side of the relays and also connect the load side of the relays to the back of the terminal strip. Harness wire kits include all necessary red lead wires to replace your current wires.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy do the replacement harness wire sets have yellow electrical connectors and the old ones have blue connectors on the relays?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAll new harness wire sets use 12 Gauge wire rather than 14 gauge wire. If your kiln has light blue connectors on the harness wires and they show any signs of wear (corroded connections, discolored wires or burned connections) you should replace your harness wires with a new set of 12 gauge wires. The larger wires will help extend relay life by keeping them cooler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWill these harness wires fit my kiln if I have black relays or clear relays?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eBoth black and clear case relays use the same harness wire sets. For information on the different types of relays please \u003ca href=\"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0272\/1968\/9606\/files\/Replacing_Standard_Relays.pdf?v=1593277498\" title=\"Repairs and Maintenance - Kilns - Relays\"\u003ereview this document\u003c\/a\u003e. Changing out your harness wires may necessitate changing your relays as well.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kilnparts-com.myshopify.com\/pages\/repairs-and-maintenance-kilns-km-wiring-harness-repalcement\" title=\"Repairs and Maintenance - Kilns - KM Wiring Harness Replacement\"\u003eRepairs and Maintenance - Kilns - KM Wiring Harness Replacement\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSkutt Part Number \/ KilnParts.com Part Number\u003c\/strong\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003cspan\u003eSingle Phase\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e2564 \/ \u003c\/span\u003e1000133\u003cbr\u003e\u003c\/p\u003e"}
Skutt KM Harness Wire Set – Single Phase – KM1018, KM818

Skutt KM Harness Wire Set – Single Phase – KM1018, KM818

€31.00

Harness wires connect the power cord block to the line side of the relays and also connect the load side of the relays to the back of the terminal strip. Harness wire kits include all necessary red lead wires to replace your current wires. Why do the replacement harness wire sets have yellow electrical connectors and the old ones have blue conne...


More Info
{"id":6544463659071,"title":"Skutt Type S Thermocouple Block and Protection Tube (No Thermocouple)","handle":"1000121","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000121\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2098C02070\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:33:48-06:00","created_at":"2021-03-03T06:33:48-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":9000,"price_min":9000,"price_max":9000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999433279,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000121","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type S Thermocouple Block and Protection Tube (No Thermocouple)","public_title":null,"options":["Default Title"],"price":9000,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2098C02070_web_f16bc2cf-f3c2-41a5-99fc-bec24cf2a4de.jpg?v=1637017198"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2098C02070_web_f16bc2cf-f3c2-41a5-99fc-bec24cf2a4de.jpg?v=1637017198","options":["Title"],"media":[{"alt":null,"id":21307268431935,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2098C02070_web_f16bc2cf-f3c2-41a5-99fc-bec24cf2a4de.jpg?v=1637017198"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2098C02070_web_f16bc2cf-f3c2-41a5-99fc-bec24cf2a4de.jpg?v=1637017198","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000121\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2098C02070\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Type S Thermocouple Block and Protection Tube (No Thermocouple)

Skutt Type S Thermocouple Block and Protection Tube (No Thermocouple)

€90.00

KilnParts.com Part Numbers 1000121 Skutt Part Numbers 2098C02070How do I know what thermocouple I need for my kiln? Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. The only th...


More Info
{"id":6544463527999,"title":"Skutt Type K Thermocouple with plug for KM-1 Wall Mount (M1 Cable)","handle":"1000119","description":"KilnParts.com Part Numbers\u003cbr\u003e 1000119\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1595\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_three_phase.pdf\"\u003eKM1 Wall Mounted Controller - Three Phase - Wiring Diagram\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_single_phase.pdf\"\u003eKM1 Wall Mounted Controller - Single Phase - Wiring Diagram \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:33:45-06:00","created_at":"2021-03-03T06:33:46-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":9800,"price_min":9800,"price_max":9800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254999138367,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000119","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type K Thermocouple with plug for KM-1 Wall Mount (M1 Cable)","public_title":null,"options":["Default Title"],"price":9800,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1595_web_a8bf0f47-4d05-4b09-ad65-14daf3ea3472.jpg?v=1637017195"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1595_web_a8bf0f47-4d05-4b09-ad65-14daf3ea3472.jpg?v=1637017195","options":["Title"],"media":[{"alt":null,"id":21307268104255,"position":1,"preview_image":{"aspect_ratio":2.93,"height":273,"width":800,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1595_web_a8bf0f47-4d05-4b09-ad65-14daf3ea3472.jpg?v=1637017195"},"aspect_ratio":2.93,"height":273,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1595_web_a8bf0f47-4d05-4b09-ad65-14daf3ea3472.jpg?v=1637017195","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"KilnParts.com Part Numbers\u003cbr\u003e 1000119\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1595\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what thermocouple I need for my kiln? \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. \u003c\/p\u003e \u003cp\u003eThe only thing you really need to determine on your Skutt kiln is whether you have a type K or Type S Thermocouple. If the jacket around the wire leading from your thermocouple is yellow, you have a Type K and if the wire is green, you have an S Type. Type K is MUCH more common than Type S.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the difference between a Type K and Type S Thermocouple?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated. Lucky for potters the amount of electricity is very precise and can be measured and correlated to a temperature to be interpreted by a computer controller. Different types of thermocouples are made from different metals. Most kilns used by home and studio potters use what is called a Type K Thermocouple which are made from chromel and alumel and are inexpensive and fairly accurate. Type S Thermocouples are made from platinum and rhodium and are more expensive but more accurate.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHelp! I replaced my thermocouple and now the temperature is going backwards....\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf you reverse the red and yellow wires the temperature will start at room temperature and then start going down rather than up as you start the kiln. You will eventually trigger an ERR D (ERRD) message and the firing will stop. To fix this problem just swap the wires. Make sure the polarity is correct all the way through the thermocouple circuit.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_three_phase.pdf\"\u003eKM1 Wall Mounted Controller - Three Phase - Wiring Diagram\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/Wiring_Diagrams\/km1_single_phase.pdf\"\u003eKM1 Wall Mounted Controller - Single Phase - Wiring Diagram \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Type K Thermocouple with plug for KM-1 Wall Mount (M1 Cable)

Skutt Type K Thermocouple with plug for KM-1 Wall Mount (M1 Cable)

€98.00

KilnParts.com Part Numbers 1000119 Skutt Part Numbers 1595How do I know what thermocouple I need for my kiln? Skutt makes it easy to replace your thermocouple because almost every kiln uses the same Type K 8 Gauge Thermocouple. Even if you have an older style M1 type thermocouple you can replace it with a new style 8 Gauge. The only thing you...


More Info
Skutt KM Harness Wire Set – KM1627PK, KM1231PK, KM1227PK

Skutt KM and KMT Control Parts

€70.00
{"id":6544456515647,"title":"Skutt KM Harness Wire Set – KM1627PK, KM1231PK, KM1227PK","handle":"1000558_559","description":"\u003cp\u003eHarness wires connect the power cord block to the line side of the relays and also connect the load side of the relays to the back of the terminal strip. Harness wire kits also include all necessary red lead wires to replace your current wires. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSkutt Part Number \/ pinkwhistlesociety Part Number\u003c\/strong\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003cspan\u003eSingle Phase\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e3356 \/ \u003c\/span\u003e1000558\u003cbr\u003eThree Phase\u003cbr\u003e3357 \/ 1000059\u003c\/p\u003e","published_at":"2021-03-03T06:29:42-06:00","created_at":"2021-03-03T06:29:42-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":7000,"price_min":7000,"price_max":7000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39254985572415,"title":"Single Phase","option1":"Single Phase","option2":null,"option3":null,"sku":"1000558","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt KM Harness Wire Set – KM1627PK, KM1231PK, KM1227PK - Single Phase","public_title":"Single Phase","options":["Single Phase"],"price":7000,"weight":900,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39254985605183,"title":"Three Phase","option1":"Three Phase","option2":null,"option3":null,"sku":"1000559","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt KM Harness Wire Set – KM1627PK, KM1231PK, KM1227PK - Three Phase","public_title":"Three Phase","options":["Three Phase"],"price":7000,"weight":900,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_b435b67f-f315-461e-beaa-2b79f14a54ac.jpg?v=1637017443"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_b435b67f-f315-461e-beaa-2b79f14a54ac.jpg?v=1637017443","options":["Phase"],"media":[{"alt":null,"id":21307288485951,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_b435b67f-f315-461e-beaa-2b79f14a54ac.jpg?v=1637017443"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_b435b67f-f315-461e-beaa-2b79f14a54ac.jpg?v=1637017443","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHarness wires connect the power cord block to the line side of the relays and also connect the load side of the relays to the back of the terminal strip. Harness wire kits also include all necessary red lead wires to replace your current wires. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSkutt Part Number \/ pinkwhistlesociety Part Number\u003c\/strong\u003e\u003c\/p\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003cspan\u003eSingle Phase\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e3356 \/ \u003c\/span\u003e1000558\u003cbr\u003eThree Phase\u003cbr\u003e3357 \/ 1000059\u003c\/p\u003e"}
Skutt KM Harness Wire Set – KM1627PK, KM1231PK, KM1227PK

Skutt KM Harness Wire Set – KM1627PK, KM1231PK, KM1227PK

€70.00

Harness wires connect the power cord block to the line side of the relays and also connect the load side of the relays to the back of the terminal strip. Harness wire kits also include all necessary red lead wires to replace your current wires. Skutt Part Number / pinkwhistlesociety Part Number Single Phase3356 / 1000558Three Phase3357 / 1...


More Info
{"id":6544481714239,"title":"Skutt Relay – Solid State for Firebox 8x4 LT, Firebox 8x6 LT, GlazeTech","handle":"1000553","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000553\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2715\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the Firebox 8x4LT, Firebox 8x6LT and GlazeTech use a different style of relay than most other kilns? \u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e The lower amperage of the three models allow Skutt to use a Solid State Relay which has a loger lifespan than a mechanical relay. \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:53:00-06:00","created_at":"2021-03-03T06:53:01-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":7500,"price_min":7500,"price_max":7500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255011655743,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000553","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Relay – Solid State for Firebox 8x4 LT, Firebox 8x6 LT, GlazeTech","public_title":null,"options":["Default Title"],"price":7500,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000553\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2715\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the Firebox 8x4LT, Firebox 8x6LT and GlazeTech use a different style of relay than most other kilns? \u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e The lower amperage of the three models allow Skutt to use a Solid State Relay which has a loger lifespan than a mechanical relay. \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}

Skutt Relay – Solid State for Firebox 8x4 LT, Firebox 8x6 LT, GlazeTech

€75.00

KilnParts.com Part Numbers 1000553 Skutt Part Numbers 2715Why do the Firebox 8x4LT, Firebox 8x6LT and GlazeTech use a different style of relay than most other kilns? The lower amperage of the three models allow Skutt to use a Solid State Relay which has a loger lifespan than a mechanical relay.


More Info
{"id":6544465526847,"title":"Skutt Type K Thermocouple Extension Wire (Vinyl) – 8' with Jack for KM-1 Wall Mount","handle":"1000158","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000158\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1512\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eYellow vinyl covered thermocouple wire is used to make the connection from the back of the heat baffle to the touchpad. Vinyl wire is less heat resistant than cloth covered wire so it is used in applications where there is little chance it will contact hot kiln parts.\u003c\/p\u003e \u003cp\u003eThis lead wire includes a jack for a KM-1 wall mount controller and is 8' long.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple, the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:29-06:00","created_at":"2021-03-03T06:34:29-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":3800,"price_min":3800,"price_max":3800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255001006143,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000158","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type K Thermocouple Extension Wire (Vinyl) – 8' with Jack for KM-1 Wall Mount","public_title":null,"options":["Default Title"],"price":3800,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1512_web_ca41a4d1-16ac-49a2-b74a-b57b9a679a21.jpg?v=1637017242"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1512_web_ca41a4d1-16ac-49a2-b74a-b57b9a679a21.jpg?v=1637017242","options":["Title"],"media":[{"alt":null,"id":21307272396863,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1512_web_ca41a4d1-16ac-49a2-b74a-b57b9a679a21.jpg?v=1637017242"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1512_web_ca41a4d1-16ac-49a2-b74a-b57b9a679a21.jpg?v=1637017242","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000158\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1512\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eYellow vinyl covered thermocouple wire is used to make the connection from the back of the heat baffle to the touchpad. Vinyl wire is less heat resistant than cloth covered wire so it is used in applications where there is little chance it will contact hot kiln parts.\u003c\/p\u003e \u003cp\u003eThis lead wire includes a jack for a KM-1 wall mount controller and is 8' long.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple, the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Type K Thermocouple Extension Wire (Vinyl) – 8' with Jack for KM-1 Wall Mount

Skutt Type K Thermocouple Extension Wire (Vinyl) – 8' with Jack for KM-1 Wall Mount

€38.00

KilnParts.com Part Numbers 1000158 Skutt Part Numbers 1512Yellow vinyl covered thermocouple wire is used to make the connection from the back of the heat baffle to the touchpad. Vinyl wire is less heat resistant than cloth covered wire so it is used in applications where there is little chance it will contact hot kiln parts. This lead wire incl...


More Info
Skutt Type K Thermocouple Wire (Vinyl)

Skutt KM and KMT Control Parts

€0.25
{"id":6544465428543,"title":"Skutt Type K Thermocouple Wire (Vinyl)","handle":"1000157","description":"\u003cp\u003e\u003cstrong\u003eSold by the inch\u003c\/strong\u003e\u003c\/p\u003eKilnParts.com Part Numbers\u003cbr\u003e 1000157\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1910G20076\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eYellow vinyl covered thermocouple wire is used to make the connection from the back of the heat baffle to the touchpad. Vinyl wire is less heat resistant than cloth covered wire so it is used in applications where there is little chance it will contact hot kiln parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple, the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:28-06:00","created_at":"2021-03-03T06:34:28-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":25,"price_min":25,"price_max":25,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000907839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000157","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Type K Thermocouple Wire (Vinyl)","public_title":null,"options":["Default Title"],"price":25,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1910G20076_eb3158aa-8df2-4398-af1f-df78a542756a.jpg?v=1637017240"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1910G20076_eb3158aa-8df2-4398-af1f-df78a542756a.jpg?v=1637017240","options":["Title"],"media":[{"alt":null,"id":21307272331327,"position":1,"preview_image":{"aspect_ratio":1.0,"height":424,"width":424,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1910G20076_eb3158aa-8df2-4398-af1f-df78a542756a.jpg?v=1637017240"},"aspect_ratio":1.0,"height":424,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1910G20076_eb3158aa-8df2-4398-af1f-df78a542756a.jpg?v=1637017240","width":424}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSold by the inch\u003c\/strong\u003e\u003c\/p\u003eKilnParts.com Part Numbers\u003cbr\u003e 1000157\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1910G20076\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eYellow vinyl covered thermocouple wire is used to make the connection from the back of the heat baffle to the touchpad. Vinyl wire is less heat resistant than cloth covered wire so it is used in applications where there is little chance it will contact hot kiln parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I need to replace the porcelain block and wire if I replace the thermocouple?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo. As long as the wire and block are not damaged or corroded you will not need to replace them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhich wire is positive and which is negative?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOn a thermocouple, the red wire is negative and the yellow wire is positive.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Type K Thermocouple Wire (Vinyl)

Skutt Type K Thermocouple Wire (Vinyl)

€0.25

Sold by the inchKilnParts.com Part Numbers 1000157 Skutt Part Numbers 1910G20076Yellow vinyl covered thermocouple wire is used to make the connection from the back of the heat baffle to the touchpad. Vinyl wire is less heat resistant than cloth covered wire so it is used in applications where there is little chance it will contact hot kiln parts...


More Info
Skutt Easy View for KM Kilns

Skutt KM and KMT Control Parts

€40.00
{"id":6544465264703,"title":"Skutt Easy View for KM Kilns","handle":"1000154","description":"KilnParts.com Part Numbers\u003cbr\u003e 1000154\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2546\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe Skutt Easy View accessory easily installs on any Skutt KM kiln and brings the touchpad out at an angle so you can easily program the kiln while standing.\u003c\/p\u003e \u003cp\u003eMounting hardware is included.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:25-06:00","created_at":"2021-03-03T06:34:25-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000743999,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000154","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Easy View for KM Kilns","public_title":null,"options":["Default Title"],"price":4000,"weight":2000,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2546_web_5c5b204e-20fb-43ce-8998-743cd16a04fa.jpg?v=1637017237"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2546_web_5c5b204e-20fb-43ce-8998-743cd16a04fa.jpg?v=1637017237","options":["Title"],"media":[{"alt":null,"id":21307272036415,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2546_web_5c5b204e-20fb-43ce-8998-743cd16a04fa.jpg?v=1637017237"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/2546_web_5c5b204e-20fb-43ce-8998-743cd16a04fa.jpg?v=1637017237","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"KilnParts.com Part Numbers\u003cbr\u003e 1000154\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 2546\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe Skutt Easy View accessory easily installs on any Skutt KM kiln and brings the touchpad out at an angle so you can easily program the kiln while standing.\u003c\/p\u003e \u003cp\u003eMounting hardware is included.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Easy View for KM Kilns

Skutt Easy View for KM Kilns

€40.00

KilnParts.com Part Numbers 1000154 Skutt Part Numbers 2546The Skutt Easy View accessory easily installs on any Skutt KM kiln and brings the touchpad out at an angle so you can easily program the kiln while standing. Mounting hardware is included.


More Info
{"id":6544465199167,"title":"Skutt Terminal Block – Three Phase for all KM Three Phase and KM714","handle":"1000153","description":"KilnParts.com Part Numbers\u003cbr\u003e 1000153\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1925C01338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003ePower cord terminal blocks for all three phase KM kilns as well as the single phase KM714. Does not include mounting screws.\u003c\/p\u003e \u003cp\u003eIf your terminal block is showing any signs of corrosion replacement is reccommended.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:24-06:00","created_at":"2021-03-03T06:34:24-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":1500,"price_min":1500,"price_max":1500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000678463,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000153","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Terminal Block – Three Phase for all KM Three Phase and KM714","public_title":null,"options":["Default Title"],"price":1500,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1925C01338_web_9c0a8315-be3d-4625-ae70-7af0aa3e336e.jpg?v=1637017236"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1925C01338_web_9c0a8315-be3d-4625-ae70-7af0aa3e336e.jpg?v=1637017236","options":["Title"],"media":[{"alt":null,"id":21307271970879,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1925C01338_web_9c0a8315-be3d-4625-ae70-7af0aa3e336e.jpg?v=1637017236"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1925C01338_web_9c0a8315-be3d-4625-ae70-7af0aa3e336e.jpg?v=1637017236","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"KilnParts.com Part Numbers\u003cbr\u003e 1000153\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1925C01338\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003ePower cord terminal blocks for all three phase KM kilns as well as the single phase KM714. Does not include mounting screws.\u003c\/p\u003e \u003cp\u003eIf your terminal block is showing any signs of corrosion replacement is reccommended.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Terminal Block – Three Phase for all KM Three Phase and KM714

Skutt Terminal Block – Three Phase for all KM Three Phase and KM714

€15.00

KilnParts.com Part Numbers 1000153 Skutt Part Numbers 1925C01338Power cord terminal blocks for all three phase KM kilns as well as the single phase KM714. Does not include mounting screws. If your terminal block is showing any signs of corrosion replacement is reccommended.


More Info
{"id":6544464969791,"title":"Skutt LT Touchpad with Circuit Board (For FireBox and GlazeTech kilns)","handle":"1000555","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000555\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 3141\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe three Skutt kilns that use this controller are the Firebox 8x4 LT, FireBox 8x6 LT and GlazeTech. The touchpad unit comes complete with the circuit board and touchpad. No mounting screws are included.\u003c\/p\u003e \u003cp\u003eBy default, the touchpad comes configured for a Type K thermocouple (the most common and least expensive for kilns).\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:19-06:00","created_at":"2021-03-03T06:34:20-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":24500,"price_min":24500,"price_max":24500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000449087,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000555","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt LT Touchpad with Circuit Board (For FireBox and GlazeTech kilns)","public_title":null,"options":["Default Title"],"price":24500,"weight":900,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/KilnMasterLT_3141_d1c99e7c-bc4b-48da-89fa-e1a242416f23.jpg?v=1637017231"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/KilnMasterLT_3141_d1c99e7c-bc4b-48da-89fa-e1a242416f23.jpg?v=1637017231","options":["Title"],"media":[{"alt":null,"id":21307271643199,"position":1,"preview_image":{"aspect_ratio":1.557,"height":289,"width":450,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/KilnMasterLT_3141_d1c99e7c-bc4b-48da-89fa-e1a242416f23.jpg?v=1637017231"},"aspect_ratio":1.557,"height":289,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/KilnMasterLT_3141_d1c99e7c-bc4b-48da-89fa-e1a242416f23.jpg?v=1637017231","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000555\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 3141\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe three Skutt kilns that use this controller are the Firebox 8x4 LT, FireBox 8x6 LT and GlazeTech. The touchpad unit comes complete with the circuit board and touchpad. No mounting screws are included.\u003c\/p\u003e \u003cp\u003eBy default, the touchpad comes configured for a Type K thermocouple (the most common and least expensive for kilns).\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt LT Touchpad with Circuit Board (For FireBox and GlazeTech kilns)

Skutt LT Touchpad with Circuit Board (For FireBox and GlazeTech kilns)

€245.00

KilnParts.com Part Numbers 1000555 Skutt Part Numbers 3141The three Skutt kilns that use this controller are the Firebox 8x4 LT, FireBox 8x6 LT and GlazeTech. The touchpad unit comes complete with the circuit board and touchpad. No mounting screws are included. By default, the touchpad comes configured for a Type K thermocouple (the most common...


More Info
Skutt Feeder Wire Set – Glazetech

Skutt KM and KMT Control Parts

€28.00
{"id":6544464871487,"title":"Skutt Feeder Wire Set – Glazetech","handle":"1000584","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000584\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 3628\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:16-06:00","created_at":"2021-03-03T06:34:17-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":2800,"price_min":2800,"price_max":2800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000350783,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000584","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Feeder Wire Set – Glazetech","public_title":null,"options":["Default Title"],"price":2800,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_0063f5d1-e305-47ea-8159-1e58d02a3131.jpg?v=1637017227"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_0063f5d1-e305-47ea-8159-1e58d02a3131.jpg?v=1637017227","options":["Title"],"media":[{"alt":null,"id":21307271315519,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_0063f5d1-e305-47ea-8159-1e58d02a3131.jpg?v=1637017227"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/Image-Coming-Soon_0063f5d1-e305-47ea-8159-1e58d02a3131.jpg?v=1637017227","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000584\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 3628\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Feeder Wire Set – Glazetech

Skutt Feeder Wire Set – Glazetech

€28.00

KilnParts.com Part Numbers 1000584 Skutt Part Numbers 3628Feeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on th...


More Info
Skutt Feeder Wire Set – KM614-3

Skutt KM and KMT Control Parts

€28.00
{"id":6544464805951,"title":"Skutt Feeder Wire Set – KM614-3","handle":"1000145","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000145\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1589\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:15-06:00","created_at":"2021-03-03T06:34:16-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":2800,"price_min":2800,"price_max":2800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000285247,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000145","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Feeder Wire Set – KM614-3","public_title":null,"options":["Default Title"],"price":2800,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/KMP_1589_lg_90a96f72-690c-4798-90f3-26a3e0f9fd83.jpg?v=1637017226"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/KMP_1589_lg_90a96f72-690c-4798-90f3-26a3e0f9fd83.jpg?v=1637017226","options":["Title"],"media":[{"alt":null,"id":21307271249983,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/KMP_1589_lg_90a96f72-690c-4798-90f3-26a3e0f9fd83.jpg?v=1637017226"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/KMP_1589_lg_90a96f72-690c-4798-90f3-26a3e0f9fd83.jpg?v=1637017226","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000145\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1589\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Feeder Wire Set – KM614-3

Skutt Feeder Wire Set – KM614-3

€28.00

KilnParts.com Part Numbers 1000145 Skutt Part Numbers 1589Feeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on th...


More Info
Skutt Feeder Wire Set – KM714

Skutt KM and KMT Control Parts

€28.00
{"id":6544464773183,"title":"Skutt Feeder Wire Set – KM714","handle":"1000144","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000144\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1586\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:14-06:00","created_at":"2021-03-03T06:34:15-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":2800,"price_min":2800,"price_max":2800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000219711,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000144","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Feeder Wire Set – KM714","public_title":null,"options":["Default Title"],"price":2800,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1586_web_a8d83e2a-d89c-44f0-9f33-5e3706819e4c.jpg?v=1637017225"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1586_web_a8d83e2a-d89c-44f0-9f33-5e3706819e4c.jpg?v=1637017225","options":["Title"],"media":[{"alt":null,"id":21307271184447,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1586_web_a8d83e2a-d89c-44f0-9f33-5e3706819e4c.jpg?v=1637017225"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1586_web_a8d83e2a-d89c-44f0-9f33-5e3706819e4c.jpg?v=1637017225","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000144\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1586\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Feeder Wire Set – KM714

Skutt Feeder Wire Set – KM714

€28.00

KilnParts.com Part Numbers 1000144 Skutt Part Numbers 1586Feeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on th...


More Info
Skutt Feeder Wire Set – KM818, KM818-3

Skutt KM and KMT Control Parts

€34.00
{"id":6544464707647,"title":"Skutt Feeder Wire Set – KM818, KM818-3","handle":"1000143","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000143\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1585\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:13-06:00","created_at":"2021-03-03T06:34:14-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":3400,"price_min":3400,"price_max":3400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000186943,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000143","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Feeder Wire Set – KM818, KM818-3","public_title":null,"options":["Default Title"],"price":3400,"weight":159,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1585_web_9fe0e772-9e89-4ec1-9da2-63e9afcd1c76.jpg?v=1637017224"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1585_web_9fe0e772-9e89-4ec1-9da2-63e9afcd1c76.jpg?v=1637017224","options":["Title"],"media":[{"alt":null,"id":21307271151679,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1585_web_9fe0e772-9e89-4ec1-9da2-63e9afcd1c76.jpg?v=1637017224"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1585_web_9fe0e772-9e89-4ec1-9da2-63e9afcd1c76.jpg?v=1637017224","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000143\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1585\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Feeder Wire Set – KM818, KM818-3

Skutt Feeder Wire Set – KM818, KM818-3

€34.00

KilnParts.com Part Numbers 1000143 Skutt Part Numbers 1585Feeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on th...


More Info
Skutt Feeder Wire Set – KM1018, KM1018-3

Skutt KM and KMT Control Parts

€34.00
{"id":6544464642111,"title":"Skutt Feeder Wire Set – KM1018, KM1018-3","handle":"1000142","description":" KilnParts.com Part Numbers\u003cbr\u003e 1000142\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1584\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-03T06:34:12-06:00","created_at":"2021-03-03T06:34:12-06:00","vendor":"Skutt","type":"Skutt KM and KMT Control Parts","tags":[],"price":3400,"price_min":3400,"price_max":3400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39255000121407,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1000142","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skutt Feeder Wire Set – KM1018, KM1018-3","public_title":null,"options":["Default Title"],"price":3400,"weight":159,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1584_web_bee21ddb-57eb-4949-8df1-8fc8769c5eb7.jpg?v=1637017223"],"featured_image":"\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1584_web_bee21ddb-57eb-4949-8df1-8fc8769c5eb7.jpg?v=1637017223","options":["Title"],"media":[{"alt":null,"id":21307270987839,"position":1,"preview_image":{"aspect_ratio":0.952,"height":525,"width":500,"src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1584_web_bee21ddb-57eb-4949-8df1-8fc8769c5eb7.jpg?v=1637017223"},"aspect_ratio":0.952,"height":525,"media_type":"image","src":"https:\/\/pinkwhistlesociety.com\/s\/files\/1\/0010\/1931\/4239\/products\/1584_web_bee21ddb-57eb-4949-8df1-8fc8769c5eb7.jpg?v=1637017223","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" KilnParts.com Part Numbers\u003cbr\u003e 1000142\u003cbr\u003e Skutt Part Numbers\u003cbr\u003e 1584\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFeeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrell connectors and attached them to your elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf the white insulation on my feeder wires has turned brown do I need to replace them?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIf the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it possible to remove a crimped on barrell connector?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePossible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrell connector, cut it in half horrizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"http:\/\/www.kilnparts.com\/PDF\/Skutt\/General_Repairs\/replacing_elements.pdf\"\u003eReplacing Elements in All Kilns \u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Skutt Feeder Wire Set – KM1018, KM1018-3

Skutt Feeder Wire Set – KM1018, KM1018-3

€34.00

KilnParts.com Part Numbers 1000142 Skutt Part Numbers 1584Feeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on th...


More Info